Honda CBR125R, Owner'S Manual

Page: 355 / 430

HYDRAULIC BRAKE
15-23
INSTALLATION
Install the brake caliper/bracket assembly to the
right fork leg.
Install new mounting bolts and tighten them to the
specified torque.
Install the brake hose eyelet between the stoppers
with brake hose oil bolt and new sealing washers.
Tighten the brake hose oil bolt to the specified
torque.
Install the brake pads (page 15-8).
Fill the reservoir to the upper level and bleed the
front brake system (page 15-6).
REAR BRAKE CALIPER
REMOVAL
Drain the brake fluid from the hydraulic system
(page 15-5).
Remove the brake pads (page 15-9).
Remove the brake hose oil bolt and sealing wash-
ers.
Remove the rear wheel (page 14-5).
Remove the brake caliper/bracket assembly from
the swingarm.
DISASSEMBLY
Remove the following:
– Caliper bracket
– Pin boots
– Pad spring
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf·ft)
BOLTS
OIL BOLT
SEALING
WASHERS
STOPPERS
When removing the
oil bolt, cover the
end of brake hose
to prevent
contamination.
BRAKE HOSE
OIL BOLT
CALIPER/BRACKET
ASSEMBLY
SEALING
WASHERS
BRACKET PAD SPRING
PIN BOOTS