Honda CBR125R, Owner'S Manual

Page: 137 / 430

FUEL SYSTEM (PGM-FI)
5-45
7. Check the fuel quick connect fitting for dirt, and
clean if necessary.
Place a shop towel over the quick connect fitting.
8. Pull and release the rubber cap from the retainer.
9. Hold the connector with one hand and squeeze
the retainer tabs with the other hand to release
them from the locking pawls.
Pull the connector off and remove the retainer.
• Absorb the remaining fuel in the fuel feed hose
from flowing out with a shop towel.
• Be careful not to damage the hose or other parts.
• Do not use tools.
• If the connector does not move, keep the retainer
tabs pressed down, and alternately pull and push
the connector until it comes off easily.
10.To prevent damage and keep foreign matter out,
cover the disconnected connector and pipe end
with the plastic bags.
QUICK CONNECT FITTING
SHOP TOWEL
CONNECTOR
RUBBER CAP RETAINER TABS
LOCKING PAWLS
PLASTIC BAGS