Honda CBR125R, Owner'S Manual

Page: 305 / 430

FRONT WHEEL/SUSPENSION/STEERING
13-23
Before assembly, wash all parts with a high flash or
non-flammable solvent and wipe them dry.
Apply fork fluid to a new oil seal lips, then install it
into the fork slider with its marking facing up.
Drive in the oil seal into the fork slider until the stop-
per ring groove is visible, using the special tools.
Install the stopper ring into the groove of the fork
slider securely.
Install a new dust seal.
Install the rebound spring to the fork piston and
install them into the fork pipe.
Install the oil lock piece onto the fork piston end.
Install the fork pipe into the fork slider.
TOOLS:
Driver
07749-0010000
Attachment, 42 x 47 mm 07746-0010300
FORK SLIDER
DRIVER OIL SEAL
ATTACHMENT
DUST SEAL STOPPER RING
FORK PIPE FORK PISTON
REBOUND SPRING
FORK SLIDER
OIL LOCK PIECE
FORK PIPE