Honda CBR125R, Owner'S Manual

Page: 326 / 430

REAR WHEEL/SUSPENSION
14-12
INSPECTION
Visually inspect the shock absorber for wear or
damage.
Check the following:
– Damper rod for bend or damage
– Damper unit for deformation or oil leaks
– Bushings for wear or damage
– Rubber bumper for wear or damage
Replace the shock absorber as an assembly if neces-
sary.
INSTALLATION
Install the shock absorber and upper mounting bolt.
Tighten the shock absorber upper mounting nut to
the specified torque.
Install the shock absorber lower mounting bolt and
nut.
Tighten the lower mounting nut to the specified
torque.
Install the rear cowl (page 2-5).
Check the operation of the shock absorber (page 3-
25).
SWINGARM
REMOVAL
Remove the rear wheel (page 14-5).
Remove the left step holder mounting bolts and
move the left step holder assembly downward.
RUBBER BUMPER DAMPER ROD
BUSHINGS
TORQUE: 39 N·m (4.0 kgf·m, 29 lbf·ft)
BOLT SHOCK ABSORBER
TORQUE: 44 N·m (4.5 kgf·m, 32 lbf·ft)
BOLT/NUT
STEP HOLDER
ASSEMBLY
BOLTS