Honda CBR125R, Owner'S Manual

Page: 395 / 430

LIGHTS/METERS/SWITCHES
19-3
SERVICE INFORMATION
GENERAL
• Note the following when replacing the halogen headlight bulb.
– Wear clean gloves while replacing the bulb. Do not put fingerprints on the headlight bulb, as they may create hot
spots on the bulb and cause it to fail.
– If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
• Be sure to install the dust cover after replacing the headlight bulb.
• A halogen headlight bulb becomes very hot while the headlight is ON, and remains hot for a while after it is turned OFF.
Be sure to let it cool down before servicing.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
• The following color codes are used throughout this section.
SPECIFICATIONS
TORQUE VALUES
Bu = Blue G = Green Lg = Light Green R = Red
Bl = Black Gr = Gray O = Orange W = White
Br = Brown Lb = Light Blue P = Pink Y = Yellow
ITEM SPECIFICATION
Bulbs Headlight Hi 12 V - 55 W
Lo 12 V - 55 W
Position light 12 V - 5 W
Brake/tail light 12 V - 21/5 W
Turn signal light Except CM type 12 V - 21 W x 4
CM type only 12 V - 23 W x 4
License light 12 V - 5 W
Instrument light 12 V - 1.7 W x 4
Turn signal indicator 12 V - 1.7 W
High beam indicator 12 V - 1.7 W
Neutral indicator 12 V - 1.7 W
MIL LED
Fuse Main fuse 30 A
Sub fuse 10 A x 4
Turn signal light lens screw 0.9 N·m (0.1 kgf·m, 0.7 lbf·ft)
Turn signal light mounting nut 8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
License light cover screw 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
License light mounting nut 4.5 N·m (0.5 kgf·m, 3.3 lbf·ft)