Honda CBR125R, Owner'S Manual

Page: 142 / 430

FUEL SYSTEM (PGM-FI)
5-50
INSPECTION
Check the fuel pump unit for wear or damage,
replace it if necessary.
Check the fuel filter for wear or damage.
Apply engine oil to the fuel tank contacting area of
the fuel pump.
INSTALLATION
Always replace the
packing with a new
one. Be careful not
to pinch the dirt and
debris between the
fuel pump unit and
packing.
Install a new packing onto the fuel pump unit.
Install the fuel pump unit into the fuel tank.
When installing the setting plate onto the fuel pump
unit, align the following:
– Slots of the fuel pump setting plate and tabs of
the fuel pump unit
– " " marks of the fuel pump setting plate and fuel
tank
Install the nuts and clamp.
Tighten the fuel pump nuts to the specified torque
in the specified sequence as shown.
Connect the quick connect fitting (page 5-46).
Install the fuel tank (page 5-51).
FUEL FILTER
Be careful not to
damage the fuel
level sensor float
arm.
FUEL PUMP UNIT
PACKING
FUEL PUMP UNIT
PLATE Align
" " MARKS
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Route the pump
unit wire properly
(page 1-18).
NUTS
(1)
(2)
(3)
(4)
(5)
(6)
CLAMP