Honda CBR125R, Owner'S Manual

Page: 307 / 430

FRONT WHEEL/SUSPENSION/STEERING
13-25
Apply fork fluid to a new O-ring and install it onto
the fork bolt.
Loosely install the fork bolt by pushing it to the fork
pipe.
INSTALLATION
Route the wires
and cables properly
(page 1-18).
Install the fork leg through the bottom bridge and
top bridge so that the height from the top bridge
upper surface to the fork pipe end is 32 mm (1.3 in).
Tighten the bottom bridge and top bridge pinch
bolts to the specified torque.
If the fork bolt is loosened, tighten the fork bolt to
the specified torque.
Tighten the fork
bolt after installing
the fork pipe into
the fork bridges.
O-RING FORK BOLT
FORK PIPE
FORK PIPE
TOP BRIDGE
32 mm
(1.3 in)
TORQUE:
Bottom bridge pinch bolt:
27 N·m (2.8 kgf·m, 20 lbf·ft)
Top bridge pinch bolt:
23 N·m (2.3 kgf·m, 17 lbf·ft)
BOTTOM BRIDGE
PINCH BOLT TOP BRIDGE
PINCH BOLT
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
FORK BOLT