Honda CBR125R, Owner'S Manual

Page: 345 / 430

HYDRAULIC BRAKE
15-13
Measure the master cylinder I.D.
Measure the master piston O.D.
ASSEMBLY
Replace the piston, cups and washer as a set.
Apply brake fluid to the master piston sliding area.
Install the spring onto the piston end.
Install the master piston/spring into the master cyl-
inder.
Install the washer.
SERVICE LIMIT: 11.055 mm (0.4352 in)
SERVICE LIMIT: 10.945 mm (0.4309 in)
SNAP RING
RESERVOIR COVER
DIAPHRAGM
MASTER PISTON
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
BOOT
SPRING
WASHER
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
SET PLATE
MASTER CYLINDER
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
BRAKE LIGHT SWITCH
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
BRAKE LEVER
CUPS
Do not allow the
piston cup lips to
turn inside out.
SPRING
PISTON MASTER CYLINDER
WASHER