Honda CBR125R, Owner'S Manual

Page: 299 / 430

FRONT WHEEL/SUSPENSION/STEERING
13-17
Install the speedometer retainer to the left wheel
hub, while aligning the tabs on the retainer with the
slots on the hub.
Apply grease to a new dust seal lips.
Install the dust seal until it is fully seated to the left
wheel hub.
Install the brake disc with the stamped mark
"MIN.TH. 3.5 mm" facing outside.
Install and tighten new brake disc bolts to the speci-
fied torque in a crisscross pattern in 2 or 3 steps.
Apply grease to a new dust seal lips.
Install the dust seal until it is flush with the wheel
hub surface to the right wheel hub.
INSTALLATION
Apply grease to the speedometer gear teeth, gear
inner surface and shaft outer surface (page 1-17).
Install the speedometer gear box into the left wheel
hub while aligning the tabs with the slots.
RETAINER
Align
DUST SEAL
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
Do not get grease
on the brake disc or
stopping power will
be reduced.
BRAKE DISC
BOLTS
MARK
DUST SEAL
Align
GEAR BOX