Honda CBR125R, Owner'S Manual

Page: 245 / 430

CLUTCH/GEARSHIFT LINKAGE
10-21
INSTALLATION
Install the washer.
Install the woodruff key onto the crankshaft.
Install the primary drive gear, while aligning the
groove with the woodruff key.
Install the washer.
Apply engine oil to the primary drive gear lock nut
threads and seating surface, and install it.
Temporarily install the washer, clutch outer guide
and clutch outer.
Insert the gear holder between the primary drive
and driven gears.
Tighten the primary drive gear lock nut to the speci-
fied torque using the special tools.
Install the following:
– Oil pump (page 4-8)
– Clutch assembly (page 10-13)
Be careful not to
damage the key
groove and
crankshaft.
WASHER WOODRUFF KEY
Align
PRIMARY DRIVE GEAR
LOCK NUT WASHER
TORQUE: 64 N·m (6.5 kgf·m, 47 lbf·ft)
TOOLS:
Lock nut wrench, 20 x 24 mm
07716-0020100
Gear holder 07724-0010200
Extension bar/handle 07716-0020500
LOCK NUT WRENCH
GEAR HOLDER
CLUTCH OUTER/GUIDE/WASHER
PRIMARY
DRIVE GEAR