32
Function
code
Name
Setting range
Factory
value
Communica
tion address
F5-02
X3 input terminal
function selection
7: terminal DOWN
8: free parking
9: fault reset (RESET)
10: suspension of operation
11: external fault normally open input
12: multi-segment command terminal 1
13: multi-segment command terminal 2
14: multi-segment command terminal 3
15: multi-segment command terminal 4
16: acceleration and deceleration time selection
terminal 1
17: acceleration and deceleration time selection
terminal 2
18: frequency source switching
19: UP / DOWN setting cleared ( terminal
keyboard )
20: control command switching terminal 1
21: prohibition of acceleration and deceleration
22: PID pause
23: PLC status reset
24: frequency swing suspended
25: counter input
26: counter reset
27: length count input
28: length reset
29: torque control prohibited
30: PULSE frequency input ( valid only for X5 )
31: reservations
32: direct current brake immediately
33: external fault normally closed input
34: frequency modification enabled
35: the direction of PID action is reversed
36: external parking terminal 1
37: control command switching terminal 2
38: PID integral suspended
39: frequency source X switches to preset
frequency
40: frequency source Y and preset frequency
switch
41: motor selection terminal 1
42: reservations
43: PID parameter switching
44: user-defined failure 1
45: user-defined failure 2
46: speed control / torque control switching
47: Emergency stop button
48: External parking terminal 2
49: deceleration DC brake
50: this run time is cleared
51: 2 - wire / 3 - wire switch
52: Prohibition of reversal
53: zero speed function
54: Frequency source switching 2
55: frequency source switch to multi-segment
speed
9
F502H
F5-03
X4 input terminal
function selection
12
F503H
F5-04
X5 input terminal
function selection
13
F504H
F5-05
X6 input terminal
function selection
14
F505H
F5-06
X7 input terminal
function selection
8
F506H
F5-10
X terminal filtering time
0.000s
～
1.000s
0.010s
F50AH
F5-11
Terminal command mode
0: 2 - wire type 1
1: 2 - wire type 2
2: 3 - wire type 1
3: 3 - wire type 2
0
F50BH
F5-12
Terminal UP / DOWN
change rate
0.001Hz/s
～
65.535Hz/s
1.00Hz/s
F50CH
