Hitachi HT-4139-28, Maintenance Manual

Page: 94 / 126

REV0 10.02.15
-H8-31-
8.3.20 Replacing the Panel
Tools Needed: Magnetic Philips Screwdriver (No.2),
Long-nose Pliers
①
Remove the Top Cover, the Main Cover (L)(R), and the Side Cover(L) (R). For instructions, please refer to
“8.1 Preparation”
②
Remove the Package Cover by unscrewing 4 bind-head screws and disconnecting connector J7.
③
Disconnect connector J10 attached on the MAIN P/K ASSY
Connector J
10
（
BLACK should be under
）
Connector J7
#24
#25
MAIN P/K ASSY
(CPS619 P/K)
④
Unscrew 4 bind-head screws on the Eject Guide and remove the Eject Guide
for instructions, please refer to “8.3.5 Replacing the Scanner ASSY ”
⑤
Remove 2 plastic rivets as shown below.
⑥
Remove the Panel from the countersunk.
⑦
Take the reverse steps to attach the Countersunk onto the device.
#72 Panel
Remove 2 plastic rivets
plastic rivets
Remove the Panel from the countersunk