Hitachi HT-4139-28, Maintenance Manual

Page: 77 / 126

REV0 10.02.15
-H8-14-
8.3.5 Replacing the Scanner ASSY
Eject Guide
Bind-heads screw
Bind-head screw
Bind-head screw
Bind-heads screw
①
Remove the Main Cover (L), (R) Side Cover
(R). For instructions, please refer to “8.1
Preparation”
②
Unscrew 4 screws on the Eject Guide and
remove the Eject Guide
③
Remove the Imprinting ASSY. For instructions,
please refer to “8.3.9 Replacing the Imprinting
ASSY (Imprinting Head)”
④
Unscrew 4 bind-head screws on the Plate
(DRV2)
#64 LAMP INVERTER
Bind-he ads screw
Bind-head screw
#26 SS P/K ASSY（CPS618 P/K）
Plate(DRV2 )
⑤
Disconnect 2 connectors (J71, J72) attached to
the Lamp Inverter
⑥
Disconnect 2 connectors (J101, J102) attached
to SS P/K ASSY (CPS618 P/K)
⑦
Disconnect cable from the Clamp
⑧
When removing the Plate (DRV 2), push the
cable to the side so it does not get damaged.
⑨
Remove Cover Sheet assembly. For
instructions, please refer to “8.3.14 Replacing
the Cover Sheet assembly”
⑩
Remove Lamp ASSY (Front). For instructions,
please refer to “8.2.3 Replacing the Fluorescent
Lamp”
Tools Needed: Magnetic Philips Screwdriver (No.2)
make sure to connect it straight into the device
When connecting the mirror motor connector, make sure
to connect it straight into the device.
CAUTION CAUTION CAUTION CAUTION
Disconnect
it straight