Hitachi HT-4139-28, Maintenance Manual

Page: 42 / 126

REV0 2010.02.15
-H7-9-
7.7 Work Information Viewer
(1)Start command prompt or Explore
(2)Execute C:
\
OCR32
\
DIAG32
\
WorkinfView_Rx8
Information on the rollers, imprinting, fluorescent lamp, and lighting time will be displayed.
If you only refer to the information, click the “Exit” button.
If you want to modify the information because of part replacement or other reasons, position the cursor to the
cell you want to modify and input new data and then click the “Update” button.
When you modify data, click the “Yes” button.
The device will be reset when it finishes successfully.
Click the “OK” button in the dialog below. The application will be finished.