Hitachi HT-4139-28, Maintenance Manual

Page: 112 / 126

REV0 10.02.15
-H8-49-
8.3.36 Anti-Static Brush
Tools Needed: Magnetic Philips Screwdriver (No.2)
■
Replacing the Anti-Static Brush on the Top Guide
①
Remove the Top Cover. For instructions, please refer to “8.1 Preparation”
②
Remove and replace the Anti-Static Brush on the Top Guide
③
Take the reverse step to attach the Anti-Static Brush.
#62 Anti-static brush
Top Guide
■
Replacing the Anti-Static Guide on the T11 Guide (A) ASSY
①
Remove the Top Cover and the Main Cover (L) (R). For instructions, please refer to “8.1 Preparation”
②
Remove the Stacker. For instructions, please refer to “8.3.8 Replacing the Stacker”
③
Unscrew 4 bind-head screws on the Stacker Back Guide (R)
④
Remove and replace the Anti-Static Guide from T11 Guide (A) ASSY
⑤
Take the reverse steps to attach the Anti-Static Guide
#62 Anti-static brush
Stacker Bck Guide(R)
Bind-head screw
T11 Guide(A)ASSY
Bind-head screw
Bind-head screw
Bind-head screw
■
Replacing the Anti-Static Brush on the Lower Guide
①
Remove the Hopper ASSY from the device. For instructions, please refer to “8.3.7 Replacing the
Hopper ASSY”
②
Unscrew 2 bind-head screws from the Front Guide, and remove the Front Guide.
③
Remove and replace the Anti-Static Brush on the Lower Guide.
④
Take the reverse steps to attach the Anti-Static Guide.
#62 Anti-static brush
Low Guide ASSY