5
English
(Original instructions)
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CS30SB / CS35SB / CS40SB: Chain Saw
Read all safety warnings and all
instructions.
Do not use a power tool in the rain and
moisture or leave it outdoors when it is raining.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Always wear eye protectors when using this
unit.
Always wear ear protectors when using this
unit.
Pull out the power supply plug if the cable is
damaged.
Oil pump adjustment
Guaranteed Sound power level
Chain oil
fi
ll
WHAT IS WHAT? (Fig. 1)
A: Lock-o
ff
button: Button that prevents the accidental
operation of the trigger.
B: Oil tank cap: Cap for closing the oil tank.
C: Saw chain: Chain, serving as a cutting tool.
D: Guide bar: The part that supports and guides the saw
chain.
E: Spiked bumper: Device for acting as a pivot when in
contact with a tree or log.
F: Oil sight glass: Window to check chain oil amount.
G: Chain brake: Device for stopping or locking the saw
chain.
H: Front handle: Support handle located at or towards the
front of the main body.
I: Rear handle: Support handle located on the top of the
main body.
J: Switch: Device activated by the
fi
nger.
K: Side cover: Protective cover to the guide bar saw chain,
clutch and sprocket when the chain saw is in use.
L: Tension dial: Device for adjusting tension of saw chain
M: Knob: Knob for securing tension dial and side cover
N: Chain case: Case for covering the guide bar and saw
chain when the unit is not being used.
O: Plug clip: A tool to prevent the power plug from slipping
free of an extension cord's socket.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock,
fi
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl
ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodi
fi
ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the in
fl
uence of drugs, alcohol or
medication.
0000Book̲CS30SB.indb 5
0000Book̲CS30SB.indb 5
2015/03/13 17:18:43
2015/03/13 17:18:43
Summary of Contents for CS 30 SB
Page 236: ...236 0000Book CS30SB indb 236 0000Book CS30SB indb 236 2015 03 13 17 18 58 2015 03 13 17 18 58 ...
Page 240: ...240 0000Book CS30SB indb 240 0000Book CS30SB indb 240 2015 03 13 17 18 59 2015 03 13 17 18 59 ...
Page 241: ...241 0000Book CS30SB indb 241 0000Book CS30SB indb 241 2015 03 13 17 18 59 2015 03 13 17 18 59 ...