Hioki PW8001-01 Instruction Manual Download Page 250

Page: 250 / 262

244

Rackmount Fittings

Installation instructions

WARNING

Use M4

16 mm screws to attach the fittings to the PW8001 main body.

If fittings are attached with other screws, the instrument may be damaged, causing a

risk of bodily injury.

IMPORTANT

•

Reinforce the inside of the rack with commercially available support braces or other parts as

appropriate to bear the weight of the instrument.

•

Leave at least 30 mm of space on every surface other than the underside to keep the

instrument’s temperature from rising.

Leave at least 15 mm of space underneath the instrument (the height of its feet).

Tools to be prepared:

Rackmount fitting (JIS-compliant Z5301, EIA-compliant Z5300), hexagon wrench (width across flats: 2.5 mm),

Phillips screwdriver (No. 2)

To mounting the instrument in a JIS-compliant rack

: M4

16 mm binding head

machine screw

: M4

8 mm cap bolt

: M3

8 mm binding head

machine screw

Turn off the instrument and remove all

cables.

Remove the M4 cap bolts (two each on the

left and right) that hold each handle in place

using the hexagon wrench.

Keep the removed M4 cap bolts.

Attach the rackmount fittings to the

instrument with M4

16 mm screws (two

each on the left and right).

Attach the rackmount fitting (blank panel)

with M3

8 mm screws (one each on the left

and right).

To mounting the instrument in a EIA-compliant rack

: M4

16 mm binding head

machine screw

: M4

8 mm cap bolt

Turn off the instrument and remove all

cables.

Remove the M4 cap bolts (two each on the

left and right) that hold each handle in place

using the hexagon wrench.

Keep the removed M4 cap bolts.

Attach the rackmount fittings to the

instrument with M4

16 mm screws (two

each on the left and right).

HIOKI PW8001A961-00

Summary of Contents for PW8001-01







































































































































































































































































Search results

Summary of Contents for PW8001-01

Reviews:

Related manuals for PW8001-01

Brands by name

Popular brands

Hioki PW8001-01, Instruction Manual

Search results

Summary of Contents for PW8001-01

Reviews:

Related manuals for PW8001-01

Brands by name

Popular brands