Hioki PW8001-01, Instruction Manual

Page: 130 / 262

124
Saving Measured Data
Display screen [SYSTEM] > [DATA SAVE]
1 1
1
Tap the [Parameters] box to open the
settings window.
2
Tap the parameters to be saved to
select check boxes [

] .
Master
Basic measurement items for
the master unit
Slave Basic measurement items for
the subordinate units
Basic Basic measurement items
Harmonic Harmonic measurement items
3
(When [Harmonic] is selected)
Tap the [Order Select] box, then select
the rectifier from the list.
ALL All orders
ODD Odd-numbered orders
EVEN Even-numbered orders
4
Tap the [Min Order] box, and then set
the lowest order using the Y rotary
knob.
Lit up in green: in 1 increments
Lit up in red: in 10 increments
See “Changing values with rotary knobs”
(p. 21).
0 to 500 (Values higher than the highest order
are unsettable.)
5
Tap the [Max Order] box, and then set
the highest order using the Y rotary
knob.
Lit up in green: in 1 increments
Lit up in red: in 10 increments
0 to 500 (Values lower than the lowest order
are unsettable.)
6
Tap [
×
] to close the setting window.
2 2
3 3
4 4 5 5
Tap here to switch between on and off for all items.
Tap here to switch between on and
off for all items in that row.
6 6
HIOKI PW8001A961-00