Hioki PW8001-01, Instruction Manual

Page: 24 / 262

18
Part Names and Functions
Rear
10 10 11 11
5 5
6 6
7 7
8 8
9 9
12 12
11
Motor 4 Motor 3 Motor 2 Motor 1
33
4 4
22
1 1
Input channels
Insert up to 8 channels in the form of modules that accept input of
voltage and current for one phase of power.
—
22
Voltage input terminals Connect Hioki’s optional voltage cords. p. 34
33
Probe 2 terminals
(For current sensors)
Connect sensors of the voltage output type, including a current probe
and CT.
p. 37
44
Probe 1 terminals
(For high performance
current sensors)
Connect Hioki’s optional current sensors. The instrument
automatically recognizes current sensors. It also supplies power to
the current sensors.
p. 35
55
GP-IB connector
Controls the instrument remotely using GP-IB.
Transfers measured data to a computer.
p. 173
66
RS-232C connector
(D-sub 9 pins)
Controls the instrument remotely from a computer or controller via
serial RS-232C communications.
Controls starting and stopping of integration with a contact switch.
p. 175
77
RJ-45 connector
(Gigabit Ethernet)
Controls the instrument remotely over a LAN.
Transfers measured data to a PC.
p. 158
88
Optical link connector
(This feature will be supported in firmware version 2.00.)
Connect L6000 Optical Cable.
Performs advanced measurement using 2 synchronized instruments.
—
99
BNC synchronization
connector
(This feature will be supported in firmware version 2.00.)
Performs measurement using up to 4 synchronized instruments.
—
10 10
Power supply inlet Connect the included power cord. p. 39
11 11
Waveform and D/A
output option
You can input the instrument’s output into a recorder to record data
over an extended period of time.
You can also input this signal to an oscilloscope to observe the
waveform.
p. 143
CAN/CAN FD interface
option
(This feature will be supported in firmware version 2.00.)
Measured data can be output as CAN/CAN FD signals to the CAN
bus in real time.
—
12 12
Motor analysis option
(External input)
You can input torque sensor and tachometer output to measure
motor output.
p. 78
HIOKI PW8001A961-00