Hioki PW8001-01, Instruction Manual

Page: 126 / 262

120
USB Flash Drive
USB flash drive requirements for this instrument
Connector USB Type A connector
Electrical specifications USB 3.0
Current that can be supplied Up to 500 mA
Number of ports 1
Supported USB flash drives USB Mass Storage Class
compatible
File system FAT16, FAT32
If the instrument cannot recognize a USB flash drive, press the reload button ( ) on the [FILE]
screen. If the instrument does not recognize a USB flash drive, try to use a different one. The
instrument does not support all USB flash drives available on the market.
Formatting the USB flash drive
See “Formatting the USB flash drive” (p. 136).
Removing the USB flash drive
2 2
1 1
1
Tap [EJECT] .
2
When the confirmation dialog box
appears, tap [Yes] .
3
Remove the USB flash drive from the
instrument.
IMPORTANT
Failure to follow the correct procedure for
removing the USB flash drive could damage the
data on the USB flash drive.
Media indicator
The media indicator appears in the upper right corner of the screen.
[USB] appears (background changes from gray to black).
The instrument has recognized the USB flash drive.
[USB] appears (background is red).
Indicates the USB flash drive is more than 95% full. Stop measurement, then replace the
USB flash drive with another one. Alternatively, transfer the data to your computer.
[SLOW] appears.
The instrument has recognized the USB flash drive as a drive with a slow write speed.
The instrument will only be able to save about one-third of the maximum number of
recordable parameters sampled for each interval time.
[ERROR] appears.
The USB flash drive lacks sufficient capacity, or the instrument could not recognize the USB
flash drive.
HIOKI PW8001A961-00