29
5.3
Ultrasonic Scaler
If the equipment does not work as described below,
contact an authorized Heka Dental dealer immediately.
The following descriptions apply to the UnicLine S standard foot control. For
instructions on the UnicLine S variable foot control please see the instructions
specific to this.
Activation of the scaler
When the scaler is lifted from the instrument table, constant pressure on the
activation ring of the foot control will start the instrument and the water spray.
The intensity of the scaler (0 – 100 %) and spray combination
(water) are shown on
the instrument display.
The instrument can be used with three different intensity categories – for three
different working procedures, ENDO (E), PERIO (P) and SCALING (S).
When the hand piece is lifted from the instrument holder it is possible to change the
intensity category using the arrows to the left and right, and the intensity can be
changed with the arrows up and down.
The scaler is equipped with three pre-programmed intensities and 2 spray
combinations in ENDO (E), PERIO (P) and SCALING (S). Briefly activate the activation
ring twice to change between the intensities. (Please refer to the section on menu
structure for information on changing programs).
IMPORTANT
The intensity categories are defined different, depending on the Scaler manufacturer:
W&H:
Perio is 2.5% to 25% of max. intensity.
Endo is 5% to 50% of max. intensity.
Scaler is 10% to 100% of max. intensity
Satelec/Vario:
Perio is 0% to 22% of max. intensity.
Endo is 24% to 60% of max. intensity.
Scaler is 62% to 100% of max. intensity
EMS:
Perio is 10 % to 100% of max. intensity.
Endo is 5% to 50% of max. intensity.
Scaler is 55% to 100% of max. intensity
The display always shows the percentage of the intensity categories chosen – not the
percentage of the max. intensity!!!!
Modification of the spray function
To change the spray combination of the scaler, lift the instrument from the
instrument table to activate it.
Combination of spraytype is shown on the display of the instrument table.
Summary of Contents for Unicline S
Page 12: ...12 1 9 UnicLine S Labelled Diagram...
Page 54: ...54 12 5 Hydraulic diagram...
Page 64: ...64 13 1 Menu overview...
Page 83: ...83 Notes...