44
11
Maintenance
Removing the instrument support
The instrument support can easily be removed for
cleaning by pulling the rest out from the instrument
table.
For Cleaning and disinfection se Chapter10
Maintenance of the equipment should be an integral part of the routines of the clinic.
Current daily maintenance should be continued.
Instruments
O-rings for instruments must be checked and replaced if necessary. O-rings should
be lubricated with silicon grease.
Suction hoses
O-rings for the suction hoses must be checked and replaced, if necessary. O-rings
should be lubricated with silicon grease.
Spittoon
The glass bowl of the spittoon can be washed in the dishwasher. (max 65
C)
Foot control
It is important that the foot control stands stably on the floor. In time, the rubber
knobs under the foot control may become greasy from floor polish, soap etc, and the
foot control will start to slide on the floor. The rubber knobs can be cleaned with
gasoline or another degreaser.
Water Supply
There may be national or international requirements stipulating that instruments etc.
must be flushed with water after each patient and/or after a period of inactivity.
Summary of Contents for Unicline S
Page 12: ...12 1 9 UnicLine S Labelled Diagram...
Page 54: ...54 12 5 Hydraulic diagram...
Page 64: ...64 13 1 Menu overview...
Page 83: ...83 Notes...