Heka Dental Unicline S, Operating And Technical Instructions

Page: 42 / 84

42
10.4 Automatic Suction-Cleaning System
If the equipment does not work as described below,
contact an authorized Heka Dental dealer immediately.
Display
You can switch to Suction cleaning by entering the sub-menu (blue button on the
telescopic arm). Here you can choose between rinsing with water (F1 key) or with
chemicals (F4 key).
The suction cleaning system can be used with or without cleaning fluid. If you use
the system without cleaning fluid, clean water will be flushed through the system.
The automatic cleaning function can always be stopped by lifting one of the suction
syringes.
Filling liquid on
The cleaning system is set for using METASYS (Disinfection and Cleaning H1)
cleaning fluid.
You should check that there is cleaning fluid in the chemicals bag on a regular basis
and it should be replaced when necessary.
Manual/continuous cleaning of the suction system during treatment of the
patients.
Instead of automatic cleaning of the whole suction system, you can select manual
cleaning of one or more suction syringes during the treatment of a patient. Start
the cleaning function by lifting one or more of the suction hoses from the holder, then
select cleaning with cleaning fluid or water from the suction cleaning menu.
If you remove a suction hoses from the holder while another suction hoses is
being cleaned manually, both suction hoses will be cleaned.
Please note:
The manual cleaning facility uses less cleaning fluid than automatic cleaning.
Manual cleaning will stop as soon as all of the suction hoses have been replaced
in the holder. The cleaning system is set for using METASYS (Disinfection and
Cleaning H1) cleaning fluid (1 litre).