Heka Dental Unicline S, Operating And Technical Instructions

Page: 43 / 84

43
10.5 Instrument Flush
If the equipment does not work as described below,
contact an authorized Heka Dental dealer immediately.
In order to ensure a fresh water supply, the UnicLine S can be delivered with a facility
which flushes the instruments automatically with water.
Dismantle hand and contra angle pieces and the turbine.
Place the rinsing bowl in the spittoon, remove the instruments and place them in the
instrument holes.
If all instruments with a “water supply” are removed simultaneously, the telescopic
arm will switch automatically to “Instrument flush” in the top line.
If you activate F1 (1-minute flush) or F4 (6-minute flush) the water will be switched
on for all of the selected instruments and the instrument table display will count
down from either 60 or 360 seconds. When the flush time is over, the water will stop
and the Dental Delivery System will give a brief, acoustic signal. When the
instruments have been replaced, the Dental Delivery System will return to “main
menu”.
If you replace an instrument on the table before the end of the flush time, the water
will stop for the instrument in question but will continue for the others (this ensures
against “flooding” or incorrect use).
Remember! Flush the spittoon with clean water after every cleaning.
Bottled Water
You can switch between public and bottled water supply from the sub-menu (blue
button on the telescopic arm). This selection will be remember when the Dental
Delivery System is switched off and back on again.
When the Dental Delivery System is on, there will be a P (public) F1 key or a B (bottle)
F4 key in the top line after the main menu on the telescopic arm.