Heka Dental Unicline S, Operating And Technical Instructions

Page: 40 / 84

40
10 Cleaning & Disinfection
This section provides information on how to clean and disinfect the Heka Dental
UnicLine S equipment. For detailed information on cleaning, disinfecting, and
sterilizing OEM equipment and instruments purchased for use with the UnicLine S,
refer to the OEM documentation.
The Centers for Disease Control and Prevention (CDC) recommends use of a chemical
germicide registered with the EPA as a Hospital Disinfectant and labelled for
tuberculocidal activity for surfaces that have been soiled with patient material. In
compliance with this guideline, we recommend intermediate-level disinfection
between patients using Sani-Cloth AF3/Dürr FD300 or as indicated below. It is
important to follow the manufacturer instructions for use to ensure effective
disinfection.
CAUTION: Ultrasonic cleaning is not suitable for this device.
10.1 Cleaning & Disinfection for external clinical contact surfaces
The following is a list of external clinical contact surfaces:

Console

Spittoon

Foot Control

Instrument Arm

Instrument Table

Instrument Tray

Instrument Handles

Instrument Support

Instrument & Suction
Hoses

Instrument Display

Telescoping Suction Arm

Suction Tube Holder
External surfaces of the UnicLine S device should be cleaned and then disinfected.
See Pictures on page 40 for disassembly of Instrument Handles from the Instrument
Table for cleaning and disinfection.
FIRST, CLEAN
Wipe using a soft cloth moistened with mild detergent or disinfecting solution at the
beginning and end of each workday and if visibly soiled. Take Care to avoid running
water and splashing during cleaning on the unit surfaces.
SECOND, DISINFECT
After cleaning, disinfect between patients using Sani-Cloth AF3/FD300. ALWAYS
follow the manufacturer instructions for use.