57
Aspirator program.
Programming the sensor in the telescope head.
F1
Full.
Sampling (programming) with all aspirator and active instruments in the container.
F4
Empty
Sampling (programming) with all aspirator and active instruments removed from the
container.
Instruments.
Defines instruments at various Positions.
F1
Prev. (Back)
Choice of instrument position.
F4
Next. (Forward)
Choice of instrument position.
(÷)
Prev. (Back)
Choice of instrument.
(+)
Next. (Forward)
Choice of instrument.
Must be confirmed by pressing
OK
for the change to take effect.
Airrotor.
If the unit is delivered with a proportional valve, this menu is used to setup a
standard turbine as a variable turbine.
F1
You can switch between the following submenus:
Control:
F4
Var. used for variable airrotors
Const used for not variable airrotors
Valve1 min:
F3
Decrease the minimum valve1 voltage
F4
Increase the minimum valve1 voltage
Valve1 max:
F3
Decrease the maximum valve1 voltage
F4
Increase the maximum valve1 voltage
Valve2 min:
F3
Decrease the minimum valve2 voltage
F4
Increase the minimum valve2 voltage
Valve2 max:
F3
Decrease the maximum valve2 voltage
F4
Increase the maximum valve2 voltage
Valve3 min:
F3
Decrease the minimum valve3 voltage
F4
Increase the minimum valve3 voltag3
Positions 1-6 in the Instrument Table
Positions 9-12 in the Telescope Head
Summary of Contents for Unicline S
Page 12: ...12 1 9 UnicLine S Labelled Diagram...
Page 54: ...54 12 5 Hydraulic diagram...
Page 64: ...64 13 1 Menu overview...
Page 83: ...83 Notes...
