Heka Dental Unicline S, Operating And Technical Instructions

Page: 28 / 84

28
Modification of the spray function
In order to change the spray combination on the motor, the instrument must be lifted
from the instrument table. The display show the spray combination which can be
changed by pressing the middle ring of the foot control briefly.
Indicates
spray air ON blue
Indicates
spray water ON green
If the air/water spray is selected, there will be an automatic chip blow for 2 seconds
(with the standard program).
A Mechanical chip blow can be selected by holding down the middle ring. It will be
activated for as long as the ring is held down.
Adjustment of water and air
Regulators are installed under the motor module:
Regulator Regulation of: Clockwise Anticlockwise
Blue Spray air Decrease Increase
Green Spray water Decrease Increase
Neutral Cooling air Decrease Increase
The cooling air is adjusted during installation of the Dental Delivery System and
should not be readjusted .
For more detailed information on the use of the motor, please refer to the
attached instructions from the manufacturer.