Heka Dental Unicline S Operating And Technical Instructions Download Page 25

Page: 25 / 84

4.1

Console top keyboard

Normal display – no instruments activated

Chair control (only in conjunction with UnicLine S patient chair).

Manual cup fill. The cup is filled as long as the symbol is activated

Manual bowl flush.

The bowl is flushed as long as the symbol is activated

4.2

Cleaning

For easy cleaning the touch panel of the instrument table and the keyboard on the
telescopic head can be locked.

Press the chair symbol

These arrows are shown

Press simultaneously on the “up”

and the “right” arrow. Only these arrows

will be illuminated and this function will

lock the table and the keyboard.

Depending of the setup, it can stay locked
or automatically be unlocked after 2

minutes. This function can be aborted at

any time by pressing the same arrows

once more (5 sek.)

Summary of Contents for Unicline S





















































































Search results

Summary of Contents for Unicline S

Reviews:

Related manuals for Unicline S

Brands by name

Popular brands

Heka Dental Unicline S, Operating And Technical Instructions

Search results

Summary of Contents for Unicline S

Reviews:

Related manuals for Unicline S

Brands by name

Popular brands