66
In case the unit detects an error, it will beep twice and
display an error code on the telescope display.
The top line is the error number and name. In this example
“E11 Footc.NoData” means that data communication to the
foot control has been lost.
Bottom line gives an idea of what you can do to solve the
problem. If you in this example use a wireless foot control,
you should install the foot control cable. The reason could be low battery or jamming
of the wireless signal.
You remove the error display by pressing the red C bottom.
Not all Error codes are actual errors. Some Error codes are more warnings or
information. If you for example block a MC3 motor, the display will show “E31
MotorBlocked - Reactivate motor”.
An error message will not affect the function of the unit.
Summary of Contents for Unicline S
Page 12: ...12 1 9 UnicLine S Labelled Diagram...
Page 54: ...54 12 5 Hydraulic diagram...
Page 64: ...64 13 1 Menu overview...
Page 83: ...83 Notes...