5.5 Assembly Instruction
26
To assemble the system, the front and side walls of the control cabinets must be removed; they can
be lifted off after the locking screws have been unlocked by vertical positions. The grounding lines
connected to the sheets must then be disconnected
⚠
The grounding lines must be completely reconnected during assembly!
After the cabinet segments have been placed at the intended location they can be fixed and screwed
together with the aid of the bayed connectors. The bayed connectors are already preinstalled in the
AFE-cabinet. Screw them to the cage nuts that are mounted in the frame of HTS- and mains cabinet.
At each joint between the enclosures, two bayed connectors must be attached to the front and rear
rails of the enclosures (see
Fig.
14).
Mains/AFE-Cabinet
HTS-Cabinet
Fig 13 Assembly order for ERS-BIC 160
kW
Fig. 14 Placement of bayed connectors(1-2 Front, 3-4 Back)
1
2
3
4