HEIDELBERG Speedmaster CD 102, Manual

Page: 67 / 170

GR SG9015889000000000
Preset Plus Feeder
confidential
C.1.29
8.4 Outer carrier air blowers
1
2
3
Fig. 33 Middle carrier air blowers
Adjusting the blast air
1. Adjust the blast air of the outer carrier air blow-
ers (Fig. 33/1) at the control knob (Fig. 29/5).
Adjusting the height
1. Adjust the height of the outer carrier air blowers
(Fig. 33/1) with the knurled nut (Fig. 33/2).
The carrier air blowers should blow under the
sucked sheet, up to the front edge of the sheet.
Adjusting the direction of blast air
The direction of the blast air of the outer carrier air
blowers can be changed. The direction of the blast
air of the inner carrier air blowers cannot be
changed.
1. Loosen the 4-mm hexagon socket screw on the
support (Fig. 33/3).
2. Set
D
the carrier air blower (Fig. 33/1) on D.S.
slightly towards the outside in the direction
of the pile edge D.S.
D
the carrier air blower (Fig. 33/1) on O.S.
slightly towards the outside in the direction
of the pile edge O.S.
3. Tighten the hexagon socket screw at the sup-
port.
8.5 Rear edge blowers
The rear edge blowers continuously blow air onto the
pile edges.
Adjusting the blast air
1. Adjust the blast air volume at the control knob
(Fig. 29/3).