HEIDELBERG Speedmaster CD 102, Manual

Page: 160 / 170

GR FS9040030000000000
GR FS9040029000000000
Maintenance
confidential
D.3.16
3
1
4
2
Fig. 20 Suction tape – tolerance/adjustment
range
1 Suction tape
2 Mark – suction tape
3 Mark – feed table
4 Suction tape
Checking the suction tape tension
1. Engage the feeder and move the suction tape
(Fig. 20/1) until the ”mark – suction tape”
(Fig. 19/2) on the ”reference” (Fig. 19/1) is
aligned with the ”mark–feed table” (Fig. 19/4).
2. Check at the ”tolerance/adjustment range”
(Fig. 20/4), whether the ”mark – suction tape”
(Fig. 20/2) is between the ”marks – feed table”
(Fig. 20/3).
3. If necessary, adjust the suction tape tension, or
replace the suction tape. Details can be found
in Chapter ”PresetPlus feeder” of the operating
manual.
6.2 Air filter ”suction tape suction air”
1
3
2
Fig. 21 Place of installation of the air filters
”suction tape suction air”
Place of installation
1 Air filter ”suction tape suction air”
2 Feeder table
3 ”Feeder” guard
The two air filters are installed underneath the feed
table.
UTKFS9040007000000000005