HEIDELBERG Speedmaster CD 102, Manual

Page: 1 / 170

GR 009560002000000000
I.1
1 Preface Preset Plus feeder
1.1 Notes for the reader
Fig. 1 Operating manual
Target group
This operating manual is addressed to you as the
operator of the Preset Plus feeder. It is valid for all
Preset Plus feeders of this type series. It shows you
how you can operate the Preset Plus feeder and how
you can achieve good results quickly. Always have
this manual available in the vicinity of the printing
press.
Structure of the operating manual
The operating manual is subdivided into main chap-
ters and chapters. The main chapters are marked by
letters (A, B, C, ...).
The sub-chapters are marked by numbers
(1, 2, 3, ...).
The main chapter A Safety contains the information
that is required for working safely on the press.
The main chapter B describes the function of the
electric controller.
The main chapter C describes the mechanical com-
ponents of the Preset Plus feeder, and its operation
and adjustment.
The main chapter D describes the maintenance of
the Preset Plus feeder.
The main chapter D Index helps you in finding spe-
cific information.
Each main chapter and each chapter starts with the
related table of contents.
Control panels and displays
This manual describes the maximum configuration of
the Preset Plus feeder. The control panels and dis-
plays on the Preset Plus feeder may therefore be
different. They depend on type and configuration.
Abbreviations used in this document
Fig. = Figure
D.S. = drive side
O.S. = operator’s side
PU = printing unit
LED = light-emitting diode
MID = press display
KID = compact display
UTK009560201001000000
UTK009560201000000000002