HEIDELBERG Speedmaster CD 102, Manual

Page: 105 / 170

GR SG9015887000000000
GR SG9015865000000000
GR SG9015866000000000
Preset Plus Feeder
confidential
C.1.67
1
2
Fig. 89 Removing the guide plate
Removing the guide plate
2. Loosen the screws (Fig. 89/1) on the guide
plate.
3. Remove the guide plate (Fig. 89/2) from the
suction tape module.
Fig. 90
4. Turn the suction tape module over (Fig. 90).
1
2
3
Fig. 91 Removing the idler pulley
Removing the rollers for the tape guide
5. Loosen the two grub screws (Fig. 91/1) on the
roller bearings.
6. Use a punch (Fig. 91/2) for removing the two
shafts.
With light blows, drive the shafts out of the roller
bearing and pull off the shafts.
7. Remove the rollers (Fig. 91/3).