HEIDELBERG Speedmaster CD 102, Manual

Page: 109 / 170

GR SG9015862000000000
GR SG9015860000000000
GR SG9015861000000000
Preset Plus Feeder
confidential
C.1.71
19.6 Installing the suction tape module
1
Fig. 99
Note
The suction tape module is heavy. Do
not carry the suction tape module on
your own. Ask another person to help
you.
1. Ensure that the tear-off detector / multiple-sheet
detector is tied up. See ”Removing the suction
tape module” in this chapter.
2. Together with a second person, place the suc-
tion tape module onto the feeder frame.
Insert the suction tape module first at the suc-
tion tape drive roller, then at the printing unit.
3. Secure the suction tape module with the four
screws (Fig. 99/1) on the feeder frame.
1
2
Fig. 100
Installing the air supply
4. Plug the two suction air hoses (Fig. 100/2) onto
the hose nozzles on the suction tape.
Tighten the screw (Fig. 100/1) on the clamp
strap.
1
2
Fig. 101
Hook in the pneumatic cylinder of the breather
5. Hook in the pneumatic cylinder (Fig. 101/2) at
the breather.
6. Close the retaining spring (Fig. 101/1) on the
pneumatic cylinder.