HEIDELBERG Speedmaster CD 102, Manual

Page: 108 / 170

GR SG9015864000000000
GR SG9015873000000000
Preset Plus Feeder
confidential
C.1.70
19.5 Stretching the suction tape
1
Fig. 97
1
2
3
4
5
Fig. 98
1. Tighten the suction tape with the clamp bolt
(Fig. 97/1) until it lies flatly on the suction tape
module, but is not yet stretched.
Marks on the suction tape module (Fig. 98/1 ... 3)
and bore marking in the suction tape
(Fig. 98/4 and 5) are intended to help you with adjus-
ting the correct tape tension.
2. Move the suction tape until
D
the first bore marking in the suction tape
(Fig. 98/4) is at the line mark (Fig. 98/1).
D
the second bore marking in the suction
tape (Fig. 98/5) is at the line mark
(Fig. 98/2).
3. Stretch the suction tape with the clamp bolt
(Fig. 97/1). The suction tape has properly been
stretched if the bore markings in the suction
tape (Fig. 98/4 and 5) are at the single line
mark (Fig. 98/1) and at the outer line mark
(Fig. 98/3).