HEIDELBERG Speedmaster CD 102, Manual

Page: 85 / 170

GR SG9015838000000000
GR SG9015847000000000
Preset Plus Feeder
confidential
C.1.47
13.6 Clearing the feeder
1000
h
1
3
2
Fig. 58
The Clear feeder button is on the feeder
control panel. This function enables you
to clear the sheets from the feed table.
Condition
Sheet arrival detector, missing sheet
overrun sheet control, and double
sheet detector have not been trig-
gered.
1. Press the
Release sheet stop finger button
(Fig. 59/1) on the control panel of the first print-
ing unit. Remove the sheet above the sheet ar-
rival detector. The sheet stop finger remains
released (sheet stop finger up) as long as you
press the button.
2. Press the Clear feeder button (Fig. 58/1).
Sheet travel is switched off. The sheets on the
feed table are transported to the printing unit in
the direction of the sheet travel. Ratchet pawl
and sheet stop finger are closed.
3. Remove the sheets from the feed table before
they reach the sheet alignment.
13.7 Switching the feeder back on after double sheet or multiple sheet recognition
1
Fig. 59
Prerequisite: The feeder was switched off after
double or multiple sheets have been detected.
1. Remove the double or multiple sheets from the
feeder.
To remove the sheets under the sheet stop fin-
ger, press the
Release sheet stop finger button
(Fig. 59/1) on the control panel of the first print-
ing unit. The sheet stop finger remains released
(sheet stop finger up) as long as you press the
button.
2. Switch on the feeder (Fig. 58/2) and the sheet
travel (Fig. 58/3).
UTKSG9015080000000000008
UTKSG9015080000000000002