HEIDELBERG Speedmaster CD 102, Manual

Page: 167 / 170

Index
E.1
E Index
A
Adjusting spindle
Pile alignment, D.3.11
Adjusting the pre-separation air, C.1.30
Air filter
Suction air pull lay/propelling roller,
D.3.19
Air filter ”suction air pull lay/propelling roller”
Cleaning,
D.3.19
Place of installation, D.3.19
Replacing, D.3.20
Air filter ”suction air suction air”
Maintenance point description, D.3.17
Air filter ”suction tape suction air”
Maintenance point description, D.3.17
Approved lubricants, D.1.10
Automatic pile alignment, C.1.12
Automatic pile transport changeover
Capacitive sensor, D.3.14
B
Ball type lubricating nipple,
D.1.9
Bearing blocks
Side stops, D.3.12
Bearing blocks of the side stops
Place of installation, D.3.12
C
Capacitive sensor
Automatic pile transport automatic pile transport,
D.3.14
Capacitive sensor ”Automatic pile transport
changeover”
Place of installation,
D.3.14
Compressed-air control unit
Checking the condensation water,
D.3.9
Place of installation,
D.3.9
Pressure reducer, D.3.9
Control panel, A.1.6
Cover guide height
Adjusting, B.1.6
CP 2000 user interface
Menu ”Counter”/display ”Total impression
counter”,
D.1.8
CPTronic user interface
Menu ”Entire press/Paper run”, D.1.8
Crash bar
Adjusting, C.1.62
Function, C.1.62
D
Double sheet detector
Bundle detector, B.1.13, C.1.44
Clearing the feeder, C.1.47
Double sheet detector in the pull lay (option),
C.1.43
Switching the feeder back on after double sheet or
multiple sheet recognition,
C.1.47
Tear-off detector / multiple-sheet detector , B.1.14,
C.1.45
Ultrasound double sheet detector,
C.1.42
E
ELKALUB LA 8 P
Lubricant of the central grease lubrication, D.1.10
F
Feeder
Forwarding suckers,
D.3.7
Lifting suckers, D.3.5
Middle bearing of the forwarding roller shaft,
D.3.16
Preloading device,
D.3.4
Rotary valve, D.3.8
Safety instructions, D.3.3
Suction head, D.3.5
Suction tape, D.3.15
Feeler roller, C.1.46
FLC 1012
Lubricant spray, D.1.10
Forwarding rollers
Adjusting to sheet format, C.1.48
Forwarding suckers,
C.1.21, D.3.7
Adjusting forwarding suckers,
C.1.21
Cleaning and checking,
D.3.7
Front lays,
C.1.58
Adjusting the blowing/suction nozzles, B.1.3,
C.1.60
Adjusting the front lay deflection,
B.1.7
Adjusting the gripper bite, C.1.59
Cleaning, C.1.59
Throwing on/off, C.1.58
G
Grease, D.1.10
Optimol LONGTIME PD 2,
D.1.10
Renolit AS,
D.1.10
Grease gun,
D.1.9