HEIDELBERG Speedmaster CD 102, Manual

Page: 169 / 170

Index
E.3
Stop bars, D.3.4
Preset Plus feeder SM 102 / CD 102
Service activities, D.2.5
Pressure reducer
Compressed-air control unit, D.3.9
Pre-separation air, C.1.30
Printing unit
Safety instructions, D.3.18
Printing unit with Preset Plus feeder SM 102 / CD
102
Service activities,
D.2.8
Propelling roller
Adjusting the suction air, B.1.4
Pull lay
Adjusting the pull distance, C.1.52
Adjusting the pull stop, C.1.51
Adjusting the retainers, C.1.53
Adjusting the sheet size, C.1.49
Adjusting the suction air, B.1.4, C.1.50
Cleaning the pull lay, C.1.54
Rotary valve, D.3.20
Switching automatic cleaning on/off, B.1.8
Pull lay monitor, C.1.51
Adjusting the pull lay monitor, C.1.51
Preselecting the pull lay monitor, C.1.51
Switching on/off, B.1.9
R
Rear edge blowers, C.1.29
Adjusting the blast air, C.1.29
Adjusting the direction of blast air, C.1.30
Recessed grease nipple, D.1.9
Renax AS
Lubricant spray, D.1.10
Renolit AS
Grease, D.1.10
RIVOLTA TRS
Oil spray, D.1.10
Rope guide
Replacing the rope,
C.1.37
Rotary valve,
D.3.8
Cleaning,
D.3.8
Pull lay,
D.3.20
Rotary valve ”pull lay”
Cleaning, D.3.21
S
Safety instructions
Feeder, D.3.3
Printing unit, D.3.18
Separator rolls
Cleaning, C.1.56
Cleaning the sheet guide plate, C.1.57
Function, C.1.55
Height adjustment, C.1.55
Position adjustment, B.1.5, C.1.56
Throwing off, C.1.56
Service activities
Preset Plus feeder SM 102 / CD102, D.2.5
Printing unit with Preset Plus feeder SM 102 / CD
102,
D.2.8
Service instructions,
D.1.3
Sheet separation blower
Adjusting the blast air,
C.1.28
Sheet separation blowers
Adjusting the height, C.1.28
Sheet separator fingers
Adjusting the distance to the pile, C.1.26
Adjusting the height, C.1.26
Fitting the supports, C.1.26
Function, C.1.25
Sheet stop fingers
Raising the sheet stop fingers, C.1.61
Side stops
Bearing blocks, D.3.12
SM 102 / CD 102
Service activities Preset Plus feeder, D.2.5
Service activities printing unit with Preset Plus
feeder,
D.2.8
Stop bars
Place of installation,
D.3.4
Suction air pull lay/propelling roller
Air filter,
D.3.19
Suction discs of the lifting suckers
Checking, replacing if necessary, D.3.6
Suction head
Adjusting blast air, C.1.27
Adjusting blast air on the suction head, C.1.27
Adjusting the format, C.1.17
Adjusting the height, C.1.17
Components, C.1.16
Forwarding suckers, D.3.7
Lifting suckers, D.3.5
Maintenance points, D.3.5
Overview of functions, C.1.27
Place of installation, D.3.5
Reducing the suction air for lifting suckers and
forwarding suckers,
C.1.21
Rotary valve,
D.3.8
Suction tape,
D.3.15
Adjusting the suction air,
B.1.4
Installing the suction tape, C.1.68
Installing the suction tape module, C.1.71
Maintenance point description, D.3.15
Opening/closing the by-pass valve, B.1.4
Place of installation, D.3.15
Preparing dismantling, C.1.63
Removing the suction tape, C.1.66
Removing the suction tape module, C.1.63
Stretching the suction tape, C.1.70