9/15/06
888-2586-001
3-7
WARNING: Disconnect primary power prior to servicing.
Section 3 Operator Guide
Platinum Z16HD+
Figure 3-6 PA Temperature Metering
[HOME, METERING, D, B, C]
Example 2
You want to check or possibly change the Maximum High Power Setting. This falls
under the category of CONFIGURATION, but this menu item only shows up on the
second screen of the HOME layer. Therefore, press the following keys:
[MORE, CONFIGURATION, B, C] Then choose the desired modulation format.
This should have taken you to the screen shown in Figure 3-7. This screen now allows
the operator to change the Maximum High Power setting using the A, B, C and D
function keys. Pressing the BACK key updates the change, while pressing HOME
would cancel any changes.
Figure 3-7 Max High Power Configuration Screen
[MORE, CONFIGURATION, B, C, then choose the desired modulation format]
3.4.5
Asterisk and Pound Signs (*, #)
The asterisk and the pound sign characters are used in some of the metering menus of
the Diagnostics Display. If an asterisk (*) shows up in a metering menu, it means that
there is no data being received for that reading. The pound sign will only be used in the
Vg (Gate Control Voltage for the individual PAs) menus and signifies that there has
been a crossover (this is a condition where one PA Controller crosses over and mutes
the PAs associated with another PA Controller).
Summary of Contents for Platinum Z16HD+
Page 4: ...MRH 2 888 2586 001 9 15 06 WARNING Disconnect primary power prior to servicing ...
Page 6: ...9 15 06 888 2586 001 MRH 1 WARNING Disconnect primary power prior to servicing ...
Page 8: ...viii 888 2586 001 9 15 06 WARNING Disconnect primary power prior to servicing ...
Page 10: ...x 888 2586 001 9 15 06 WARNING Disconnect primary power prior to servicing ...
