manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 93

5-37

METHODS

When all the variables are set, press 

 to proceed with the “Calculating Sample

Concentration” formula:

5.5.13.8.3 Generic Formula

This option allows the user to define their calculation formula for the “Direct Titration Volume”,
“Calculating Excess Volume of Titrant 1” and “Final Sample Concentration” in a solid or liquid
sample.

5.5.14

Dilution Option

When the initial sample is diluted, a titration is made with an aliquot of the diluted sample,
dilution calculations can be used.
The calculations are based on the original sample weight (volume) in order to express the
results for the initial sample.

Final Dilution Volume:

The volume of the sample after dilution

Aliquot Volume:

Sample volume used for the titration

Analyte size to be diluted: The initial sample weight (volume)

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands