manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 134

7-28

pH, mV & ISE MODE

7.3.2.15

Stirrer Configuration

Set the stirrer configuration: Stirrer 1, Stirrer 2 or Disabled.

7.3.2.16

Stirring Speed

The stirring speed for the selected stirrer can be set.

7.3.3

 ISE Calibration

It is recommended to calibrate the instruments frequently if high accuracy is required. The
instrument should also be recalibrated whenever the “Calibrate Electrode” message appears
on the LCD.

Due to electrode conditioning time, the electrode must be immersed for several seconds to
stabilize. The user will be guided step by step during calibration with easy-to-follow mes-
sages on the display. This will make the calibration a simple and error-free procedure.

PREPARATION:
Pour small quantities of the standard solution into clean beakers. If possible, use plastic
beakers to minimize any EMC interferences.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands