manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 64

5-8

METHODS

5.5.3

Titration Type

In order to perform an analysis you have to choose the type of titration:

Standard Titration

• A titration with a pH or mV equivalence point detection.
• A titration with fixed pH or mV end point.
• A titrant standardization.

Back Titration

A titration with a pH or mV equivalence point detection, consisting of two titration phases:

• Phase 1 – the sample is consumed by a known volume and concentration of titrant 1.

A sufficient amount of titrant 1 is dispensed to surpass the equivalence point in order
to react quickly with the sample.

• Phase 2 – the excess of titrant 1 is titrated with the titrant 2 to the equivalence point.

The concentration of the sample is determined by the amount of titrant used in
phase 2.

5.5.2

Method Revision

This option allows you to enter a string representing the current method revision. The
revision string format should be “X.Y”, where X and Y are numerical digits.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands