manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 113

7-7

pH, mV & ISE MODE

•

Use 

 and 

 keys to select the desired buffer.

•

Press 

 to invalidate the selected buffer.

•

Press 

 to edit the selected buffer; use the numeric keys to edit the buffer values.

•

Press 

 to save the value.

•

Press 

 to return to pH Setup menu.

7.1.2.4

Edit Buffer Group

Select up to five buffers from the available buffers (Hanna or Custom) to be used for automatic
buffer recognition (Automatic Buffer Entry Type).
Within the Buffer Group, pH values must be at least 1.5 pH far apart.
If the Buffer Group already contains five pH buffers, at least one pH buffer has to be removed
in order to add another buffer.

•

Use the arrow keys to select the pH buffer to be included/removed in/from the buffer
group.

•

Press 

 or 

 to add/remove the selected pH Buffer to/from buffer group.

•

Press 

 to return to pH Setup menu.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands