Hanna Instruments HI 902 Color Quick Start Manual Download Page 162

Page: 162 / 248

A1-4

APPENDIX 1

Potentiometric Titrations:

Acid-Base (pH or mV-Mode), Redox, Precipitation,

Complexometric, Non-Aqueous, Ion-Selective, Argentometric.

Titer Determination.

Fixed mV or pH End Point Detection.

Single Equivalence Point Detection,

with the 1

or 2

Derivatives of the titration curve.

Multiple Equivalence Point Detection

Flexible Concentration Calculations

, with many concentration units.

Graph Display

during titration, graphs of the stored titration data (mV-Volume or pH-

Volume titration curve, 1

derivative curve or 2

derivative curve, in pH-mode or mV-

mode) and pH/mV values versus time-data logging results.

Data Storage:

up to 100 complete titration report and pH/mV/ISE reports.

Files Copied to and Restored from USB Storage Device

: Standard Methods, User

Methods, Titration and pH/mV/ISE Logging Reports, and Bitmap Files can be transferred to
a PC using a USB storage device.

Peripheral Units:

External VGA Display

External PC Keyboard

Printer

PC via USB Interface

GLP Conformity:

Good Laboratory Practice and Instrumentation Data storage and printing

capabilities.

Mains:

110/220 Vac ; 50-60 Hz

Power Draw:

1.3 Amps

2 Exchangeable Fuses

Enclosure Material:

ABS plastic and Steel

Keypad:

Polycarbonate

Dimensions:

Width x Depth x Height = 390 x 350 x 380 mm

Weight:

approx. 22 lbs. (10 Kg) (with 1 pump, stirrer and sensors)

Operating Environment:

10 to 40 °C, up to 95% relative humidity

Storage Environment

: -20 to 70 °C, up to 95% relative humidity

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands

Hanna Instruments HI 902 Color, Quick Start Manual

Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands