manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 136

7-30

pH, mV & ISE MODE

7.4

Logging

Data logging is available in pH, mV or ISE mode. It can be a single data point or a continuous
timed log.
To customize the logging report:

• Press 

 to display the

 Data Parameters

  screen.

• Highlight the 

Setup pH/mV/ISE Report  option and press 

 to display the 

Setup

pH/mV/ISE Report

  screen.

• Use the 

 and 

 keys to highlight the data field that you want to show/hide in

the pH/mV/ISE report and then press 

 to activate/deactivate it.

• Each field marked by “*” is an active field selected for the report.

• Press 

 to save the customized report.

7.4.1

Automatic Logging

The logging interval is set in the pH / mV / ISE setup screen.

Press 

 to start the log.

The logging interval and name of logging file will be also displayed on the measure screen.

To stop the automatic logging, press 

 again.

7.4.2

Manual Logging

To manually log pH, mV or ISE readings, press 

 from the 

pH, mV

   or 

ISE

  screen.

A new record will be added to the report every time 

 is pressed.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands