manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 228

6

TITRATION THEORY

1.3

Advantages and Disadvantages of Titrations

Some advantages of titrations as an analytical technique are:

•

More precise results than many instrumental methods, such as measurement
by electrode, the accuracy of the measurement is up to 0.1%

•

Simple methods, reasonable capital costs, and easy training

•

Suitability to measure major components of a mixture or product

•

Automation can reduce time and labor spent on each analysis

Some disadvantages of titrations are:

•

Time it takes to prepare standards and titrants

•

Good technique is required to achieve precise results (training and practice
required)

•

Not suitable for determining trace or minor components of a mixture or product

•

Limited dynamic range, it may require additional sample preparations (dilution)
and repeat analyses

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands