manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 150

9-4

MAINTENANCE, PERIPHERALS

9.1.3

Disassembling the Burette

The aspiration and the dispensing tubes have fittings and tube protectors. The aspiration
tube will be mounted in the left side and the dispensing tube will be mounted in the right
side of the burette.
To remove the dispensing tube and the aspiration tube follow these steps:

• Slide up the tube protector (3);

• Remove the tube lock (4) from the burette holder.

• Unscrew the fitting (2).

• Remove the tube.

9.1.4

Assembling the Burette

To attach the dispensing tube and the aspiration tube, follow these steps:

• Insert the flat-shaped end of the dispensing tube into the valve outlet, and screw in

the fitting so that the highest of its 9 cuts stays vertically in the final position (2).

• Bend the tube up into the vertical position to enter the highest cut of the fitting (5).

• Put on the tube lock on the fitting (4).

• Slide down tightly the tube protector (3) into the dedicated gap of the tube lock.

3

1

4

1

2

1

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands