manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 38

3-4

USER INTERFACE

3.2

Description

This chapter describes the basic principles of navigating through the user interface, selecting
fields and entering values from the keypad.

3.2.1

Keypad

The titrator’s keypad is grouped into five categories, as follows:

3.2.1.1

Function Keys

If one of these keys is pressed, the associated function is immediately performed. Some of
the keys are active only in specific screens:

Starts or stops a titration

Turns the stirrer ON and OFF

Reserved

Access the results menu

Displays contextual Help

3.2.1.2 Option Keys

These keys are assigned to the virtual keys on the display. Their functions are listed in the
boxes above the buttons and vary depending on the displayed screen.
An underlined virtual key can also be activated by pressing 

.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands