Hanna Instruments HI 902 Color Quick Start Manual Download

Page: 46 / 248

4-4

GENERAL OPTIONS

4.1.1

Temperature Source

Select the temperature source used for temperature compensation.

When

Automatic Temperature Compensation is selected “ATC” is displayed on the main screen

and the temperature is read by the temperature probe.

When

Manual Temperature is selected “Manual” is displayed on the main screen and a preset

temperature value is used for temperature compensation.

Note:

The selected temperature source will be indicated in the report files, A for Automatic

and M for Manual.

4.1.2

Manual Temperature Setting

If the temperature probe is not connected, the user can manually set the temperature used
by the titrator for compensation. This can be done when the

Manual Temperature option is

selected (see Section

4.1.1 Temperature Source).

The temperature value can be set between –5 and 105 ºC.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Search results

Summary of Contents for HI 902 Color

Reviews:

Related manuals for HI 902 Color

Brands by name

Popular brands

Hanna Instruments HI 902 Color, Quick Start Manual

Search results

Summary of Contents for HI 902 Color

Reviews:

Related manuals for HI 902 Color

Brands by name

Popular brands